- Load Capacity:15 lb
- Working Height Range: 29.5 to 58.9"
- Folded Length: 31.9"
- Quick-Flip Leg Locks, Aluminum Tripod
- Three-Section Legs, Mid-Level Spreader
Quick Overview
- Load Capacity:15 lb
- Working Height Range: 29.5 to 58.9"
- Folded Length: 31.9"
- Quick-Flip Leg Locks, Aluminum Tripod
- Three-Section Legs, Mid-Level Spreader
- Continuous Pan Drag, Fixed Tilt Drag
- 501/501PL-Type Plate with Locating Pins
- Ball-Leveling Head, Fixed Counterbalance
- Telescopic Handle for Right or Left Side
- Spiked/Rubber Feet, Padded Carrying Case
Product Description
The aluminum A572LLKH Lightning Lock Tripod Kit with KH Head from Benro pairs the 60mm bowl KH video head with the superfast Lightning Lock tripod featuring single flip-lock adjustments. The KH head features a 15 lb payload and continuous pan drag. This tripod kit comes with convertible spiked/rubber feet and a carrying bag.
A572LL Lightning Lock Tripod
Lightning Lock System
The aluminum A572LL tripod legs feature Benro's Lighting Lock System for a superfast setup with a single flip of each leg's lock. This tripod has a height range of 29.5 to 58.9" with the KH head attached.
Mid-Level Spreader
The included mid-level spreader provides increased stability on uneven surfaces; an optional ground spreader is available separately for use on flat surfaces like a studio floor.
Convertible Feet
This tripod's spiked feet provide improved purchase when working outdoors on uneven terrain, and the rubber pads are suitable for protecting indoor surfaces.
Carrying Case
The included case can be used to easily carry the tripod.
KH Video Fluid Head
Supports 15 lb
Use this tripod system with camera rigs weighing up to 15 lb.
501/501PL-Type Plate
The included KH video fluid head comes with a 501/501PL-type quick release plate featuring two anti-twist locating pins.
Pan and Tilt Drag
This head has fixed pan and drag levels with independent locks for each function. The tilt has a forward range of 0 to 90°.
Benro A572LLKH Specs
Key Specs
| Camera Mounting | 1/4"-20 & 3/8"-16 Screws with Locating Pin (Quick Release Plate) |
| Head Type | Ball Head |
| Drag Control | No |
| Primary Material | Aluminum |
| Load Capacity | 15 lb / 6.8 kg |
| Maximum Working Height | 59.4" / 151 cm |
| Minimum Working Height | 29.7" / 75.5 cm |
| Closed Length | 31.9" / 81 cm |
| Weight | 8.6 lb / 3.9 kg |
Head
| Camera Mounting | 1/4"-20 & 3/8"-16 Screws with Locating Pin (Quick Release Plate) |
| Head Type | Ball Head |
| Base Mount | 60 mm Half Ball |
| Counter Balance | Fixed |
| Dimensions | Camera Plate: 3.9" / 10.00 cm |
Pan & Tilt
| Drag Control | No |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Vertical Tilt | +90° to 0° |
| Lateral Tilt | No |
Legs
| Primary Material | Aluminum |
| Leg Lock | Flip Lock |
| Leg Sections | 3 |
| Independent Leg Spread | Yes |
| Leg Positions | Continuously Adjustable |
| Foot Features | Dual Spiked |
General
| Load Capacity | 15 lb / 6.8 kg |
| Maximum Working Height | 59.4" / 151 cm |
| Center Column | No |
| Minimum Working Height | 29.7" / 75.5 cm |
| Closed Length | 31.9" / 81 cm |
| Accessory Mounting | 2x Pan Handle Fitting |
| Bubble Level | Yes |
| Detachable Monopod | No |
| Spreader Support | Mid-Level (Included) Ground (Not Included) |
| Weight | 8.6 lb / 3.9 kg |
×
Request Assistance
Unfortunately, our supplier cannot provide an accurate timeframe so we have suspended backorders for this item. Reach out to our Experts (available via Live Chat or Phone) to find an alternative solution tailored to your needs.
Contact Us
×